The LMT:
Laser Marking Tool
Installs into your existing tool changer, no permanent modification, no separate marking station. Cuts part numbers, serials, logos, and Data Matrix codes directly into the part with non-contacting laser precision, in the same cycle you already run.
Controls
Two Marking Modes.
One Tool.
Switch modes without swapping hardware. Clockwise rotation enables vector, counterclockwise is raster.
Vector Mode
Program the toolpath directly - like an engraving op. Proven in production, from install through live parts.
Raster Mode
Line based marking, timing synced with the machine. Produce different outputs with the same production program.
Features & Specs
A permanent engraving
Part numbers, logos, Data Matrix codes, whatever you program. It survives what a sticker or ink stamp won't: heat, machining fluid, handling, service life.
Laser precision - in your equipment
The LMT installs where your tooling already lives, and marks parts in the same cycle you already run. Like a laser end mill - another tool in your toolbox.
No new step in your process
The LMT swaps into an existing tool change. Marking happens in-cycle, at the machine control point, with no separate marking station and no operator handoff.
WAVELENGTH: 1064nm pulsed fiber
SPOT SIZE: <100µm
PULSE: ~1ns, 1–10kHz
SHANK: 1/2",
Diameter: 88mm body
SPINDLE SPEED: Enables ≥750 RPM, up to 1000 RPM
POWER: Battery, ~90 min runtime
Depth: Up to 25µm per pass - influenced by travel speed
Every mark can become a signed identity
The LMT is the point of entry. Lase-X’s identity software can turn what the LMT engraves into a system - a cryptographically signed record, linked to design data, quality records, and service history.